|
Wedge Mounts Series DTSP with Spherical Positioner
SPHERICAL POSITIONERS are designed to transmit the load of the machine to the ground through wedge mounts at 90 degree despite the angle difference between machine base and foundation. The pressure on the insulation plates remain even. Thus, better alignment is possible. Variations are available for free standing and bolt on machine bases either with or without insulation damping. Dynemech is open to the idea of developing customer specific requirements.
| Model | Lord Kg / pc | Length (L) mm | Width (B) (mm) | Height (H) at mean position (mm) | D (mm) | E(mm) | Bore Ø | Adjst. Range (mm) | D(mm) | DTSp1 - i
| 1800 | 115 | 115 | 69 | 50 | 24 | 22 | 8 | 110 | DTSp2 - i
| 2900 | 150 | 150 | 74 | 60 | 23 | 22 | 10 | 150 | DTSp3 - i
| 5200 | 200 | 200 | 73 | 75 | 27 | 28 | 12 | 200 | DTSp4 - i
| 6500 | 200 | 250 | 95 | 95 | 27 | 28 | 18 | 200 | DTSp5 - i
| 10000 | 250 | 320 | 100 | 125 | 55 | 28 | 18 | 250 | DTSp6 - i
| 15000 | 300 | 400 | 100 | 148 | 50 | 30 | 20 | 300
|
| Model | Lord Kg / pc | Length (L) mm | Width (B) (mm) | Height (H) at mean position (mm) | D (mm) | E(mm) | Bore Ø | Adjst. Range (mm) | D(mm) | DTSp1 - s2
| 950
| 115
| 115
| 69
| 50
| 24
| 22
| 8
| 110
| | DTSp2 - s2
| 1600
| 150
| 150
| 74
| 60
| 23
| 22
| 10
| 1501
| | DTSp3 - s2
| 2800
| 200
| 200
| 73
| 75
| 27
| 28
| 12
| 200
| | DTSp4 - s2
| 3500
| 200
| 250
| 95
| 95
| 27
| 28
| 18
| 200
| | DTSp5 - s2
| 5500
| 250
| 320
| 100
| 125
| 55
| 28
| 18
| 250
| | DTSp6 - s2
| 8500
| 300
| 400
| 100
| 148
| 50
| 30
| 20
| 300
|
|
